How to Lower Your Heating Bill This Winter: What Works

When the heating runs almost every day, it’s easy to wonder how much the next bill will cost. Maybe you’ve already tried turning down the thermostat. Or you’re considering a space heater, better window insulation, or something else that might keep the house warm for less.

But here’s where it gets tricky. A change that saves money with a gas furnace might actually cost more with a heat pump. And sometimes a higher bill has more to do with energy rates or colder weather than your heating habits.

If you want to lower your heating bill this winter, start by figuring out what’s driving the cost. That way, you can spend less on heating without wasting money on fixes your home doesn’t need.

Disclaimer: This content is for informational purposes only and does not constitute financial, HVAC, electrical, or home-safety advice. Follow equipment instructions and consult qualified professionals for heating-system repairs, electrical work, or safety concerns.

Why Is Your Heating Bill So High?

Before changing your heating habits, take another look at the bill itself.

A higher total doesn’t necessarily mean your furnace, heat pump, or boiler is suddenly using more energy.

How much energy did you use?

Depending on your heating system, the bill may show electricity in kilowatt-hours (kWh), natural gas in therms, or delivered fuel such as propane or heating oil in gallons.

Compare those amounts with an earlier bill. If possible, use the same month from the previous winter rather than comparing January with October.

A colder month will usually require more heating, even when nobody changes the thermostat.

Your utility bill may not separate heating from everything else using electricity or gas. Comparing similar winter periods can help you spot a pattern, but it won’t tell you exactly how much your heating system used unless you have separate usage data.

Did the price of energy change?

You might use roughly the same amount of natural gas as last winter and still pay more because the rate increased.

Check the price per unit, supply charges, delivery charges, and other fees. Some charges are fixed or don’t change directly with your heating habits.

If the cost per unit rose but your consumption stayed similar, buying a new thermostat won’t solve the price increase.

Was the billing period longer?

A bill covering 35 days can look noticeably higher than one covering 28 days.

Check the billing dates, especially when comparing consecutive months. Dividing usage by the number of billing days can give you a more useful starting comparison.

Is the heating system working harder than it should?

Sometimes the home itself or the heating equipment is contributing to the increase.

You might notice that:

  • Certain rooms stay cold even when the heating runs frequently.
  • The system seems to run much longer than it used to.
  • You feel strong drafts around doors or windows.
  • A heat pump frequently uses auxiliary or emergency heat.
  • The home struggles to reach its normal thermostat setting.

These signs don’t automatically mean something is broken. Colder weather can explain longer heating cycles, for example.

But if the change is unusual or the system isn’t heating properly, have it checked rather than assuming you need to lower the thermostat further.

While you’re checking the bill, you can also look for obvious drafts, make sure heating equipment isn’t blocked, and check whether your thermostat settings suit your heating system.

Match Your Heating Changes to the System You Have

Heating systems don’t all produce and distribute warmth the same way.

That’s why advice like “turn down the heat whenever you leave” or “close the vents in unused rooms” isn’t suitable for every home.

Heating SystemWhat to Pay Attention To
Gas furnaceThermostat settings, filters, airflow, maintenance, and gas usage
Heat pumpThermostat compatibility, backup electric heat, and proper operation
Electric baseboard heatersRoom-by-room temperature controls and electricity costs
Boiler or radiator heatingHeating controls, radiator clearance, and system maintenance
Propane or heating oilFuel consumption, delivery prices, and equipment condition

If You Have a Gas Furnace or Boiler

For a conventional furnace or boiler, reducing the temperature when you don’t need as much heat can reduce energy use.

For example, if your household is comfortable with a slightly lower temperature overnight, that may be worth trying.

You don’t need to make a large change immediately. Start with a setting that remains comfortable and appropriate for everyone in the home.

If your heating system has a programmable thermostat, a schedule may make those adjustments easier to maintain.

Keep in mind that boilers, radiant-floor heating, and other systems with slow temperature recovery may need different controls or schedules. Follow the equipment manufacturer’s guidance.

Routine maintenance also matters. A dirty filter in a forced-air furnace, blocked airflow, or equipment needing service may affect performance.

If the system isn’t heating normally, don’t attempt repairs involving gas, burners, wiring, or other specialized components.

If You Have a Heat Pump

Heat pumps deserve special attention because some common thermostat advice can backfire.

A heat pump normally moves heat rather than producing it through electric resistance. That can make it more efficient than electric baseboard heating or a standard electric space heater.

However, some heat-pump systems use electric resistance backup heat when additional heating is needed.

Important: Heat Pump Thermostat Settings

If you make a large thermostat setback overnight and then ask the system to warm the house quickly in the morning, that backup heating may turn on.

The additional electricity use can reduce or even cancel the savings you expected.

The U.S. Department of Energy’s heat-pump guidance discusses compatible thermostats designed to limit unnecessary electric resistance heating.

Check whether your system and thermostat support efficient setbacks. In some homes, maintaining a relatively steady heating setting is more economical than frequently making large changes.

And if emergency heat seems to be running unexpectedly, don’t treat it as a setting to switch off blindly. The system may need professional attention.

If You Have Electric Baseboard Heaters

Electric baseboard heating is different from a central forced-air system.

If the heaters have individual room thermostats, you may be able to reduce heating in rooms that aren’t being used.

That can be useful when you spend most of your day in one part of the home.

Still, don’t turn rooms down so far that you create freezing-pipe, moisture, or other safety problems.

Make sure furniture, bedding, and curtains aren’t too close to the heaters, and follow the manufacturer’s clearance requirements.

Electric baseboard heaters don’t have furnace filters, so there’s nothing to replace unless your home has another heating system that uses them.

If You Use Propane or Heating Oil

Your bill may depend on both the amount of fuel consumed and what your supplier charges per gallon.

Check your delivery statements and whether your supplier offers different pricing arrangements.

Some households may be able to choose between available suppliers or pricing plans, while others have limited options because of contracts or location.

Compare the full terms before switching. A lower advertised price may not account for delivery fees, minimum orders, tank arrangements, or contract conditions.

How to Lower Heating Costs Without a Major Upgrade

Once you understand your heating system, several inexpensive changes may be worth trying.

Deal With Noticeable Drafts First

If cold air comes through a gap under the front door, replacing light bulbs won’t make the room any warmer.

A draft stopper or suitable weatherstripping may help reduce that particular source of heat loss.

Check around doors and windows, especially where you can feel air moving or see worn seals.

If you have a wood-burning fireplace, check that its damper is properly closed when the fireplace is completely out of use and safe to close. Never close it while a fire or hot embers remain.

Renters may prefer removable products, provided their lease allows them.

Avoid sealing intentional ventilation openings, combustion-air supplies, or equipment vents. Those serve important safety purposes.

For larger gaps, attic problems, or hidden air leaks, professional assessment may be more appropriate than guessing where to apply sealant.

Let Sunlight Help During the Day

On sunny winter days, opening curtains on windows receiving direct sunlight can help warm the room.

Close them again when that sunlight is gone if doing so helps reduce heat loss through the windows.

This won’t replace your heating system, but it can make some rooms more comfortable without additional equipment.

Keep Heating Equipment Clear and Maintained

If you have a forced-air furnace or compatible heat-pump system, check the filter according to the manufacturer’s instructions.

Keep supply vents and return-air openings clear of furniture, rugs, and other obstructions.

With radiators or baseboard heaters, follow the required clearance rules instead of treating them like forced-air vents.

Don’t close registers or shut off portions of a central system simply because a room is unused. Doing so may interfere with airflow or system operation.

If the equipment is overdue for maintenance, ask a qualified technician whether servicing is appropriate. Professional maintenance is different from buying a new heating system, and it may help identify problems before you spend money on larger improvements.

Use Thermostat Changes That Suit Your Household

A lower thermostat setting can reduce heating demand in many homes, but the change still needs to make sense.

If people are home throughout the day, there’s less opportunity to reduce heating while the house is empty.

If someone has health needs that require a warmer environment, keeping the home adequately heated takes priority.

And if you use a heat pump, the system-specific advice above matters more than a generic recommendation to lower the temperature by several degrees.

You don’t need to follow the same thermostat schedule as another household to make a sensible decision.

Will a Space Heater Actually Save You Money?

A portable space heater can make one room feel warmer. But whether it lowers your total heating bill is a different question.

Suppose you’re working from home in a small office.

You might wonder whether heating that room with a space heater would cost less than running central heating for the entire house.

It might, but only under the right circumstances.

How Much Does It Cost to Run a Space Heater?

Example: Cost to Run a Space Heater

Consider a 1,500-watt electric space heater.

If it runs at full power for four hours per day and your electricity rate is $0.20 per kWh, here’s the calculation:

1. Convert watts to kilowatts.

1,500 watts ÷ 1,000 = 1.5 kW

2. Calculate daily electricity use.

1.5 kW × 4 hours = 6 kWh

3. Calculate the daily cost.

6 kWh × $0.20 = $1.20

Over 30 days:

$1.20 × 30 = $36

That’s an illustrative $36 in electricity costs for the month.

Actual costs depend on your electricity rate, how long the heater operates, and whether its thermostat cycles the heating element on and off. The calculation also excludes the purchase price.

When Could a Space Heater Be Cheaper?

The $36 estimate tells you what the space heater costs to run, not whether you’ll save on heating overall. That depends on what happens to your central-heating costs.

Suppose you run the space heater while leaving the central heating at its usual setting.

You’ve added electricity use without necessarily reducing the central system’s workload. Your total heating expense may increase.

Now suppose you can safely reduce central heating while warming one regularly occupied room.

If that change reduces central-heating costs by more than the space heater adds, there may be a net saving.

Using the example above, central-heating costs would need to fall by more than $36 over the month to offset the heater’s electricity expense.

That doesn’t mean the saving is guaranteed.

It depends on your home, the heating system, the amount of central heating you can actually reduce, and the comfort and safety needs of everyone living there.

In particular, a heat pump may deliver heat more efficiently than a portable electric resistance heater. Replacing heat-pump heating with a space heater isn’t automatically cheaper.

A space heater can be useful for comfort in one area. Just don’t assume it saves money because the device itself is small.

Space Heater Safety Matters More Than Potential Savings

Portable heaters carry fire risks and need to be used correctly.

Space Heater Safety

The U.S. Consumer Product Safety Commission recommends keeping portable heaters at least three feet away from combustible materials and plugging electric space heaters directly into wall outlets, never extension cords or power strips.

Follow the manufacturer’s instructions, use the heater on a suitable stable surface, and turn it off when sleeping or leaving it unattended.

Never use an oven, outdoor grill, generator, or other unapproved fuel-burning device to heat an indoor living space. Carbon monoxide poisoning and fires are serious risks.

Saving money isn’t a reason to compromise heating safety.

When Is It Worth Spending Money on Better Heating Efficiency?

It’s easy to buy something labeled “energy saving” and assume the bill will get smaller.

But the product needs to solve a problem your home actually has.

Your Home Is Drafty

If you can feel cold air around doors and windows, low-cost sealing may be a sensible first expense.

But if the problem involves poor attic insulation or leaks you can’t locate, spending money on several small products may not address the main source of heat loss.

A home energy assessment can help identify where improvements are likely to matter.

Before paying for one, check whether your utility provider offers a free or discounted assessment.

Your Thermostat Doesn’t Match Your Routine

A programmable or smart thermostat may help when the heating system is compatible and the household has a routine that benefits from scheduling.

For example, a family that’s regularly away for much of the day may find scheduling more useful than a household where someone is almost always home.

A smart thermostat can also provide convenient controls and reminders, which may justify its price for some households.

But if your existing thermostat already handles the schedule you need, replacing it isn’t necessarily a worthwhile heating-cost investment.

Heat-pump compatibility is especially important before purchasing.

Your Heating Equipment Is Aging or Performing Poorly

A replacement furnace, boiler, or heat pump can be a substantial expense.

An efficient replacement may reduce future energy use, especially when replacing certain older or less efficient systems.

That doesn’t automatically mean replacing functioning equipment early is the best financial choice.

Ask for a professional assessment and compare the installed cost, likely energy savings, expected remaining service life, and any necessary work such as electrical or duct modifications.

A repair might be appropriate. In other cases, replacement could make more sense.

Check the Payback Before Buying

A simple way to evaluate a proposed improvement is to divide its cost by the annual savings you reasonably expect.

For example, if a project costs $300 and is estimated to save $60 per heating season, the simple payback would be five heating seasons.

That is only a hypothetical calculation, not a prediction of what weatherstripping or insulation will save in your home. Actual savings may be lower, higher, or difficult to measure.

The calculation also leaves out future energy prices, financing costs, maintenance, and benefits like a more comfortable home.

If you’re likely to move before the savings repay the cost, factor that into the decision too.

Also, verify incentives before counting them as savings. In the United States, the federal Energy Efficient Home Improvement Credit under Section 25C is no longer available for qualifying improvements placed in service after December 31, 2025, according to the IRS.

State, local, and utility rebates may still be available, but their eligibility and funding can vary.

What If You Rent or Can’t Afford the Heating Bill?

Not everyone can decide to replace windows, upgrade insulation, or install a new heating system.

And sometimes the bill is already more than the household can comfortably pay.

If You Rent Your Home

Start with the heating controls and temporary improvements you’re permitted to use.

You may be able to adjust an individual thermostat, use suitable removable weatherstripping, or change how curtains are used during colder weather.

But if a window doesn’t close properly or the heating system can’t maintain adequate warmth, that is something to report to your landlord or property manager.

Explain the specific problem rather than simply saying the bill is high.

For example, a bedroom window that won’t seal or a radiator that remains cold gives the property manager something concrete to investigate.

Document the issue and follow your lease and applicable local tenant rules. Landlord responsibilities vary by location.

Don’t attempt unauthorized repairs to heating equipment or gas connections.

If You’re Struggling to Pay for Heating

Contact your energy provider before the bill becomes overdue if possible.

Ask whether they offer hardship assistance, payment arrangements, income-based discounts, or other programs.

Some households may also qualify for the federal Low Income Home Energy Assistance Program (LIHEAP), which can help with eligible heating costs or energy emergencies.

The Weatherization Assistance Program (WAP) may help qualifying households improve energy efficiency.

You can find program information and application guidance through USAGov’s energy-bill assistance resources.

Eligibility, available funding, and local procedures vary.

If your provider offers budget billing, it may help spread seasonal costs more evenly. That can make winter payments easier to plan, but it doesn’t automatically reduce the total amount you owe.

If the home isn’t adequately heated or the equipment may be unsafe, don’t rely on cutting your energy use further as the solution. Seek appropriate assistance, maintenance, or emergency help.

Make Your Next Heating Change Count

Before buying another heating gadget, check what your latest bill actually shows. Choose one change that fits your home and heating system, then compare usage when the next bill arrives, allowing for changes in weather and billing days.

You may not be able to control the weather or what your utility company charges. But you can avoid spending money on fixes that don’t address the problem, while keeping your home safely and comfortably heated.